NODE-384 / NODE-640 Integration Capabilities
For the 384/640 platform — video, control, alarms and radiometry for PTZ domes, bullet cameras, pods and shipboard systems. NODE-1280 uses the separate GigE / Modbus RTU interface shown below.
Full IP Stack
RJ45 100M Ethernet with 20+ protocols: RTSP streaming, HTTPS, 802.1x, NTP, DDNS, SNMP, QoS, UPnP and more.
Triple-Codec Video
H.265 / H.264 / MJPEG at full 50 Hz frame rate, plus CVBS analog output for legacy monitors.
ONVIF · SDK · ISAPI
Open API for software integration — drops into VMS platforms and third-party management systems.
Motorized Lens Drive
One-key / timed autofocus under 5 s and zoom control over 12-pin + 14-pin interfaces; potentiometer and magnetic-encoder lenses.
PELCO-D PTZ Control
RS-485 pan/tilt control with 255 presets; RS-232 transparent / console / custom modes and serial passthrough.
Sub-0.2 s Alarms
Gray-scale detection with settable thresholds — alarm via protocol upload or hardware IO, plus shielded regions.
Temperature-Assist Radiometry
With 15/25/35/50 mm lenses: -40℃ ~ ambient+70℃, Max (±8℃, ±8%) at 1~25 m — units in ℃/℉/K.
Field-Proof Design
Dual system backup survives power loss; overvoltage protection, 6.6 grms vibration, 30 g shock, 300k-cycle shutter.
NODE-384 / NODE-640 Shared Platform Specifications
Sensor
VOx uncooled microbolometer, ceramic package, 12 μm, 8~14 μm
Video Output
RJ45 IP (H.265/H.264/MJPEG) + CVBS analog
Integration API
ONVIF + SDK + ISAPI, open network video interface
PTZ Control
RS-485 PELCO-D, 255 presets; RS-232 passthrough
Focus
Manual / one-key / timed AF <5 s; manual zoom
Alarm I/O
1 in + 1 out (3.3 V); gray alarm <0.2 s
Radiometry
-40℃ ~ ambient+70℃, Max (±8℃, ±8%), 1~25 m
Environment
-40~70℃ operating, 6.6 grms vibration, 30 g shock
Choose Your Core
Three resolutions across two platforms — 100M Ethernet / PELCO-D on NODE-384/640, Gigabit Ethernet / Modbus RTU on NODE-1280.
 |
 |
 |
|
|---|---|---|---|
| Resolution | 384 × 288 | 640 × 512 | 1280 × 1024 |
| NETD (@25℃, F1.0) | <30 mK | <35 mK | ≤30 mK |
| Power | <2.4 W (focus/zoom off) | ≤2.9 W (focus/zoom off) | <4 W typical |
| Athermalized lens options | 4.4 / 6.4 / 9.7 / 15.4 / 25 / 35 / 50 / 75 / 100 mm | 5.2 / 7.9 / 10 / 15 / 25 / 35 / 50 / 75 / 100 mm | 25 / 35 / 50 mm |
| Widest FOV (wide-end lens) | 55.3° × 42.9° (4.4 mm) | 72.9° × 61.1° (5.2 mm) | 34.2° × 27.6° (25 mm) |
| Narrowest FOV (telephoto lens) | 2.6° × 2.0° (100 mm) | 4.4° × 3.5° (100 mm) | 17.5° × 14.0° (50 mm) |
| Frame rate | 50 Hz | 50 Hz | 25 / 50 Hz (per delivery firmware) |
| Video & network | RJ45 100M, H.265/H.264/MJPEG, ONVIF/SDK/ISAPI, CVBS | RJ45 100M, H.265/H.264/MJPEG, ONVIF/SDK/ISAPI, CVBS | GigE 10/100/1000M, H.265/H.264/MJPEG, ONVIF/GB28181, CVBS |
| Control interfaces | RS-485 PELCO-D (255 presets), RS-232, alarm in/out, 12-pin + 14-pin lens drive | RS-485 PELCO-D (255 presets), RS-232, alarm in/out, 12-pin + 14-pin lens drive | RS-485 Modbus RTU, 3.3 V UART, 2 alarm inputs + 1 alarm output |
| Dimensions / weight | 40 × 41 × 65 mm / ≤129 g (without lens) | 40 × 41 × 65 mm / ≤129 g (without lens) | 44.5 × 44.5 mm end face; 93.4 mm length with 50 mm lens; weight per configuration |
| Operating temperature | -40℃ ~ +70℃ | ||
Build Your Networked Thermal Camera
Tell us your housing, lens and platform requirements — we will match the NODE core and lens combination.
Contact Our Engineers