Case Study
All articles filed under Case Study — 48 articles.
Drone-Based Hot Spot Inspection Across a Utility-Scale Solar Park
How an O&M contractor thermally surveyed all 520,000 modules of a 200 MW solar park in eleven flying days — recovering 1.8% of annual yield and a warranty claim in the process.
Read More →
UAV Thermal Inspection of Transmission Line Hot Spots
How a provincial grid operator replaced one helicopter sortie a year with an in-house drone thermal program — quadrupling inspection cadence on 3,800 km of mountain transmission lines.
Read More →
Inline Temperature Monitoring on a Battery Formation and Grading Line
How a power-battery plant added overhead thermal monitoring to its formation and grading workshop — catching silent cooling failures and per-cell hot spots that channel data could not see.
Read More →
Early Warning of Thermal Runaway at a Battery Energy Storage Station
How a 100 MW/200 MWh grid-side battery storage station added fixed radiometric thermal monitoring of its rack aisles — catching failing modules hours before gas or smoke detectors could respond.
Read More →
Thermal Cores on Inspection Robots for Underground Cable Tunnels
An underground cable tunnel swapped manual patrols for a rail-guided robot carrying an OEM thermal core: every joint and termination imaged on schedule, with radiometric data streamed back to the control center.
Read More →
Watching Loose Contacts — UPS Cabinet Temperature Monitoring
A data facility put a compact thermal camera inside its UPS cabinets to watch bolted connections: a loosening lug heats up weeks before it fails, and now someone gets an alarm instead of a surprise.
Read More →
Thermal Cores in the Lab — Battery Charging and Material Defect Studies
A university lab built two experiments on one OEM thermal core: mapping heat distribution across a charging battery pack, and finding hidden cavities in building materials — both with exportable radiometric data.
Read More →
24/7 Thermal Monitoring Replaces Manual Checks on Welding Lines
A welding shop moved temperature control from once-a-shift pyrometer checks to continuous thermal monitoring tied into the plant system — catching process drift between checks instead of after scrap.
Read More →
Preventing Coal Pile Self-Ignition with Fixed Thermal Monitoring
A coal yard installed fixed thermal cameras over its stockpiles: hot spots from oxidation are detected days before smoke, and sprinklers or reclaiming are dispatched to the exact pile zone at risk.
Read More →